Microvisor® Hood Disclaimers
The MICROVISOR® SB-30(S/W/B) may require the use of a 5/8” nylon spacer on microwaves over the range models that have doors with a convex bottom (curved). These doors project below the bottom of the microwave oven to which these doors are attached. To attach the MICROVISOR® bracket to these microwaves will require the use of a 5/8” nylon spacer. These can be purchased from the website under the product code: "5-8 Spacer Kit".
Please purchase the 1" spacer kit for the Samsung model ME18H704 or any Samsung MOR that has a center slide in/out grease filter. Click here for the Samsung 1" spacer kit.
Does not install on the following MOR's: "Whirpool Low Profile OR Panasonic NN-SE284"
Please contact us at firstname.lastname@example.org if you require additional information.
MICROVISOR® Purchase Agreement
The Microvisor® is a quality made metal mini hood. The design of the Microvisor® is such that it has metal edges and 90° front corners, and as with all sharp or pointy metal objects, it must be handled with care. The Microvisor® is made to be used correctly and carefully by an adult person when cleaning, inserting, or removing it from the attaching bracket to prevent injury. Care must be taken when running your fingers or hand along the metal edges to prevent the possibility of injury. The Microvisor® mini hood may in some instances when exposed to high BTU stovetop burners, become hot creating the need to use pot holders or insulated gloves for the removal of the Microvisor® from its bracket to prevent burns or injury to the hands. Improper handling may cause injury. By clicking “I Agree” the purchaser agrees to hold Microvisor® Products, LLC. Harmless and indemnifies Microvisor® Products, LLC. against any and all liability arising from any harm or injury that may occur as a result of improper handling of, and or coming into contact with the Microvisor® mini hood.